543-352 Mitutoyo Digimatic Indicator .5″ Range – .00005″ Res
Mitutoyo Digimatic Indicator
Technical Data…
Measuring Range: 0-0.5″/12.7 mm
Resolution: 0.001mm, .00005″ /0.001mm or .0001″/ 0.001mm
Display: LCD
Lug back
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 2.0N or less
Power supply: DC 12 – 24V
Dust/Water protection level: IP54
Functions include…
Data output (NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin- set/Preset, Zeroset, GO/NG judgment, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only)
With the max./min. value holding function, the signal ID-C can output the signal of the GO/NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.
The signal can be output to an external device like a sequencer through the NPN open-collector.
The GO/NG judgment result is also indicated by the green/red LED and the “” signs on LCD.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle “Absolute Position” from the origin at power-on.
The Signal ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.
